• Sourcing Solutions
  • Services & Membership
  • Help & Community

Quick Details

  • Place of Origin: Anhui, China (Mainland)
  • Brand Name: roadphalt
  • Model Number: RPT-Series
  • Material: asphalt rubber
  • Product Brand: Roadphalt crack and joint sealants
  • Color: Black
  • Suit for area: All-weather ( high or cold temperature ) can be used
  • Construction Process: Very easy to operation
  • The type of pavement: Asphalt pavement ,Cement concrete pavement and so on
  • High flexibility: It's can well adapt to dynamic changes of crack width
  • Factory: Yes
  • Construction Temperature: Better above 4 ℃
  • Storage: 2 years at room temperature
  • Technology Support: YES

Packaging & Delivery

Packaging Details 15 kg / paper carton ;
Delivery Time within one week after payment

            

                         Road maintenance material / road sealant material 

              

 

 

 

Product Description

 

 

Features:

  

 

1. Strong adhesion;  

2. High flexibility and durability;  

3. Good high temperature stability and low temperature resistance to brittle fracture, the tensile properties;  

4. High resistance to water loss and aging.  

5. Environmentally friendly, can effectively extend the maintenance cycle, reduce the maintenance number of times

 

 

 

 

 

 

 

 

Mode

 

 

 

 

 

  

Application: 

Asphalt pavement  

Concrete pavement  

Bridges and parking Treatment crack  

Cracks on the waterproof construction  

 

 

 

  

 

1.  Preparation 

 

(1) determine the slot size  

The slot size is based on the local pavement temperature and the road grade. Generally ,the width don’t exceed 38mm, depth of the groove should not exceed 25mm. The both sides of grooving should remove at least 3mm and should produce vertical, intact surfaces with no loosely bonded aggregate. 

 

(2) Calculate the amount of material  

According to the empirical formula, can use following formula :  

Estimation method: width (cm) * depth (cm) * Length (m) * 0.12 (kg) 

E.g.  a slot pavement : 2cm(width) *2cm(depth)*10m(length ), then crack and joint sealants amount is: 2 *2 *10 * 0.12 = 4.8 kg

  

 

2. Grooving  

Step one : design the slot size ;  

Step two :adjust to grooving machine ;  

Step three : construction

 

  

3. Clearing  

For appropriate adhesion , cracks must be cleaned and dried before pouring. After grooving or cleaning impurities, and then use high pressure ,oil free ,dry compressed air at 90psi (620kpa )minimum ,to remove any remaining dust .

 

 

 

4. Preheating  

It must preheat groove when the temperature is below 4°C.What we done just ensure the temperature above 10°C.

 

 

 

5. Pouring  

Putting the crack and joint sealants into groove when the temperature reaches 185°C. It needs pouring several times until the cracks filled.

 

 

 

6. Maintenance  

Clearing the site after the Crack and Joint Sealants Sufficient cooling(about 15-25min).  

it must be sprayed a layer of sand or powder If you need to open the traffic immediately.

 

 

 

 

 

 

 

 

 

 

 

 

Storage:

  

1. This product is non-toxic, non-dangerous goods, according to general chemical building materials transport.  

2. The transit shall not exposure, rain, upside down or damaged packaging.  

3. The product shelf life is three years (room temperature, airtight and dry storage).

 

 

 

  

 

Package:

  

  

 

 

Company Information

Introduction

 

Shanghai Roadphalt Asphalt Technology Co., Ltd. is involved in developing and marketing new technology, new materials and new techniques of road pavement. Integrating scientific research, manufacturing and sales, we are a nation-level high-tech enterprise with “new material for road pavement” as our core competence. Our company owns research labs, a large-scale manufacturing and processing plant and a nationwide sales network.

 

My company seeks partners for the international market.we will provide product technical support for you.we sincerely invite you to join us for the future comfort and safety of the road. 

 

We are provide professional service for every buyers. Whatever your pouring glue needs, we have the materials and expertise to get the job done. if you have any question ,pls contact us  with no hesitate,we would like to give you more information about our products , we are here......just for you

Transaction History of the Supplier

Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.

Transaction Overview

Transactions

Transaction Details

This supplier has completedtransactions with buyers from .

Shipping Destination
Transaction Value
Transaction Date
Email to this supplier
China (Mainland) | Manufacturer, Trading Company
Supplier Assessments:
The supplier supports Trade Assurance – A free service that protects your orders from payment to delivery.
Supplier's Trade Assurance Limit: US $
Learn More